|
language |
|
|
2- Transponders RC4 Rc type C / type A :
The transponders are activated by the magnetic bar with the help of doubled magnetic sensors.
They communicate with the decoder by using Radio-Frequency signals.
Their antenna is rigid, small sized (height = 1cm).
The
transponder RC4 Rc type C is powered with its wire (JR connector,
compatible Futaba) connected to a free output of the car radio
receiver. The typer A transponder is auto-powered by internal battery.
Its installation in the cars is easy.
 |
 |
| RC4 Rc type C and A transponders |
RC4 Rc type C transponder |
Specifications :
| Specifications | RC4 type C transponder |
RC4 type A transponder |
| Number of codes available | 65000 |
65000 |
| Response time | < 2ms |
< 2ms |
| Number of magnetic sensors |
2 |
2 |
| Critical detection height
(simple rod) |
11cm |
11cm |
| Critical detection height
(rod doubled) |
15cm |
15cm |
| Standby current consumption | 3µA | 3µA |
| Operating current consumption | 33mA |
33mA |
| Source of power |
wire (JR connector) |
1 battery CR2032 |
| Autonomy, standby mode |
Unlimited |
2 years |
|
Autonomie, number of laps |
Unlimited |
20 000 passages |
| Température range |
-10°C / + 55°C | -10°C / + 55°C |
| Dimensions ( L x W x H ) | 29 x 20 x 12 mm |
29 x 29 x 12 mm |
| Antenna ( lenght ) |
1cm rigid |
1cm rigid |
| Weight ( batteries included ) | 8g |
12g |