language

1) Installation of the transponders :

- The transponder is mounted horizontally lenghtways in the kart fixed with the inox screws provided or nylon cable ties.
  No electrical connection is needed.

- With a single magnetic bar, its installation height above the ground must be less than 8cm / 3.2" (critical detection height = 11cm / 4.3").
- With a doubled magnetic bar, its installation height above the ground must be less than 12cm / 4.7" (critical detection height = 15cm / 5.9").

- No ferrous or steel parts/plates must lie between the transponder and the ground (aluminum or inox chassis/parts are not an issue).